| |
Reverse Backup Systems Audible Only License Plate Frame Mounted Proximity Sensors. Designed for those that do not want sensors permanently installed in their bumper and only want an audible alarm. Reverse Backing Systems Audible Only Proximity Sensors. The system alerts the driver to the distance of obstacles while reversing. It is comprised of up to 4 sensors, a central control processor and a buzzer. The buzzer produces an audible warning.
Included in Kit
• Four 20 m.m. preinstalled in license plate frame
• Controller
• Owner's manual/installation instructions. | |
• Operation voltage: DC 12V
• Power consumption: 3.5W
• Operating temperature: -4°F - 140°F
• Detection distance: 1.5 - 6 feet
| |
When reversing, the 4 rear sensors that are installed on License Plate Frame send ultrasonic waves to detect obstacles behind the vehicle. The controller receives signal and the amp transmits to Speaker
Speaker emits long intermittent beeps at 4-6 feet, and as you move closer to the obstacle the beep increases in frequency. When you are 1 foot away from obstacle, the sound is continuous.
Power is supplied by tapping into the reverse lights which means that the device is only on when you are in reverse.
Features:
• Accurate measurement
• High sensitivity
• Wide detection range
• small blind area
• Sound alarm
Made by Reverse Back Systems
This product carries a Full Manufacturer's Warranty! |
|
.jpg)
