|The 6AL delivers everything the 6A does with the addition of a built-in Soft Touch Rev Control. This feature allows you to set an rpm limit to protect the engine from over-rev damage caused by driveline failure or missed shifts. Other MSD RPM Controls can be connected to the 6AL such as a Three Step Module Selector (PN 8737) or RPM Activated Switch (PN 8950). The 6AL also comes supplied with rubber shock mounts and 3,000, 6,000, 7,000 and 8,000 rpm modules.
Operating Voltage: +10-18 VDC Negative Ground
Current Requirements: 5 Amps-5,000 RPM
10 Amps-10,000 RPM
RPM Range: 15,000 RPM with 14.4 Volts
Spark Duration: 20° Crankshaft Rotation
Energy Output Max: 105-115 mJ Per Spark
Weight and Size: 3 lbs, 8"Lx4"Wx2.25"H
Voltage Output Max: Primary: 460-480 Volts
Secondary: 45,000 Volts (Blaster Coil)
Improves power, quickens throttle response.
Smooths out idle and starting.
Reduces spark plug fouling.
Improves mileage and reduces emissions.
CARB approved under E.O. D-40-17 for installation in all states.
Made by MSD Ignition
This product carries a Full Manufacturer's Warranty!